diff --git a/test/common.sh b/test/common.sh
new file mode 100644
index 0000000..7dcf638
--- /dev/null
+++ b/test/common.sh
@@ -0,0 +1,158 @@
+#!/bin/bash
+# =============================================================================
+# Common functions and variables for security hardening
+# =============================================================================
+
+# Colors for output
+RED='\033[0;31m'
+GREEN='\033[0;32m'
+YELLOW='\033[0;33m'
+BLUE='\033[0;34m'
+PURPLE='\033[0;35m'
+CYAN='\033[0;36m'
+GRAY='\033[0;37m'
+NC='\033[0m' # No Color
+
+# Date format
+DATE_FORMAT=$(date +"%Y-%m-%d")
+TIMESTAMP_FORMAT=$(date +"%Y-%m-%d %H:%M:%S")
+
+# Log file
+LOG_FILE="/var/log/security-hardening.log"
+
+# Backup directory
+BACKUP_DIR="/root/security-backup-${DATE_FORMAT}"
+
+# Function to create necessary directories
+create_directories() {
+  mkdir -p "$BACKUP_DIR"
+  touch "$LOG_FILE"
+  chmod 600 "$LOG_FILE"
+}
+
+# Function to log MESSAGEs
+log_message() {
+  local LEVEL="$1"
+  local MESSAGE="$2"
+  local TIMESTAMP=$(date +"%Y-%m-%d %H:%M:%S")
+
+  # Log to file
+  echo "$TIMESTAMP [$LEVEL] $MESSAGE" >> "$LOG_FILE"
+
+  # Display to console with colors
+  case "$LEVEL" in
+    "INFO")
+      echo -e "${BLUE}[$LEVEL]${NC} $MESSAGE"
+      ;;
+    "WARNING")
+      echo ""
+      echo -e "${YELLOW}[$LEVEL]${NC} $MESSAGE"
+      echo 
+      ;;
+    "ERROR")
+      echo ""
+      echo -e "${RED}[$LEVEL]${NC} $MESSAGE"
+      echo 
+      ;;
+    "SUCCESS")
+      echo ""
+      echo -e "${GREEN}[$LEVEL]${NC} $MESSAGE"
+      echo
+      ;;
+    *)
+      echo "[$LEVEL] $MESSAGE"
+      ;;
+  esac
+}
+
+# Function to back up a file before modifying
+backup_file() {
+  local FILE="$1"
+
+  if [ -f "$FILE" ]; then
+    local BACKUP_PATH="$BACKUP_DIR$(dirname "$FILE")"
+    mkdir -p "$BACKUP_PATH"
+    cp -p "$FILE" "$BACKUP_PATH/" 2>/dev/null
+
+    if [ $? -eq 0 ]; then
+      log_message "INFO" "Backed up $FILE to $BACKUP_PATH/"
+      return 0
+    else
+      log_message "ERROR" "Failed to back up $FILE"
+      return 1
+    fi
+  else
+    log_message "WARNING" "File $FILE does not exist, no backup needed"
+    return 0
+  fi
+}
+
+# Function to display a progress bar
+show_progress() {
+  local CURRENT="$1"
+  local TOTAL="$2"
+  local PERCENTAGE=$((current * 100 / total))
+  local PROGRESS=$((percentage / 2))
+
+  printf "\r[%-50s] %d%%" "$(printf '%0.s#' $(seq 1 $PROGRESS))" "$PERCENTAGE"
+}
+
+# Function to run a module
+run_module() {
+  local MODULE="$1"
+  local DESCRIPTION="$2"
+
+  # Increment step counter
+  ((CURRENT_STEP++))
+
+  echo
+  echo -e "${PURPLE}[$CURRENT_STEP/$TOTAL_STEPS] ${CYAN}$DESCRIPTION${NC}"
+  echo -e "${GRAY}$(printf '=%.0s' $(seq 1 80))${NC}"
+
+  # Source and run the module
+  if [ -f "$SCRIPT_DIR/modules/$MODULE.sh" ]; then
+    source "$SCRIPT_DIR/modules/$MODULE.sh"
+    show_progress "$CURRENT_STEP" "$TOTAL_STEPS"
+  else
+    log_MESSAGE "ERROR" "Module $module.sh not found"
+    show_progress "$CURRENT_STEP" "$TOTAL_STEPS"
+  fi
+}
+
+# Function to display a banner
+display_banner() {
+  clear
+  echo -e "${GREEN}"
+  echo "  _     _                     _                _             _               "
+  echo " | |   (_)_ __  _   ___  _   | |__   __ _ _ __| |_ ___ _ __ (_)_ __   __ _   "
+  echo " | |   | | '_ \| | | \ \/ /  | '_ \ / _ \| '__| __/ _ \ '_ \| | '_ \ / _ \`|  "
+  echo " | |___| | | | | |_| |>  <   | | | | (_| | |  | ||  __/ | | | | | | | (_| |  "
+  echo " |_____|_|_| |_|\__,_/_/\_\  |_| |_|\__,_|_|   \__\___|_| |_|_|_| |_|\__, |  "
+  echo "                                                                     |___/   "
+  echo -e "${NC}"
+  echo -e "${CYAN}Security Hardening Script for Debian/Ubuntu Systems${NC}"
+  echo -e "${CYAN}Version: ${VERSION}${NC}"
+  echo -e "${GRAY}$(printf '=%.0s' $(seq 1 80))${NC}"
+  echo
+}
+
+# Function to display OS information
+display_os_info() {
+  local OS_NAME=$(grep -E "^NAME=" /etc/os-release | cut -d= -f2 | tr -d '"')
+  local OS_VERSION=$(grep -E "^VERSION=" /etc/os-release | cut -d= -f2 | tr -d '"')
+  local KERNEL_VERSION=$(uname -r)
+
+  log_message "INFO" "Operating System: $OS_NAME $OS_VERSION"
+  log_message "INFO" "Kernel Version: $KERNEL_VERSION"
+  echo
+}
+
+# Function to check if command exists
+command_exists() {
+  command -v "$1" >/dev/null 2>&1
+}
+
+# Function to check if package is installed
+is_package_installed() {
+  dpkg -l "$1" | grep -q "^ii" >/dev/null 2>&1
+}
\ No newline at end of file
diff --git a/test/main.sh b/test/main.sh
new file mode 100644
index 0000000..db2281e
--- /dev/null
+++ b/test/main.sh
@@ -0,0 +1,96 @@
+#!/bin/bash
+# =============================================================================
+# Linux Security Hardening Script for Debian/Ubuntu
+# =============================================================================
+
+# Script version
+VERSION="1.0.0"
+
+# Set script directory
+SCRIPT_DIR="$(cd "$(dirname "${BASH_SOURCE[0]}")" && pwd)"
+
+# Source common functions and variables
+source "$SCRIPT_DIR/common.sh"
+
+# Ensure the script is run as root
+if [ "$EUID" -ne 0 ]; then
+  echo " * This script must be run with sudo privileges."
+  echo " * Please run it again using: sudo $0"
+  echo 
+
+  exit 1
+fi
+
+# Check if the system is Debian or Ubuntu
+if ! grep -q -E "Debian|Ubuntu" /etc/issue && ! grep -q -E "Debian|Ubuntu" /etc/os-release; then
+  echo "This script is designed for Debian or Ubuntu systems only."
+
+  exit 1
+fi
+
+# Create necessary directories
+create_directories
+
+# Display banner
+display_banner
+
+# Display OS information
+display_os_info
+
+# Main execution
+log_message "INFO" "Starting security hardening process"
+
+# Initialize progress
+TOTAL_STEPS=14
+CURRENT_STEP=0
+
+# Update and configure package management
+$SCRIPT_DIR/modules/package_management.sh "Configuring package management"
+
+# Configure SSH
+$SCRIPT_DIR/modules/ssh_hardening.sh "Hardening SSH configuration"
+
+# Configure firewall
+$SCRIPT_DIR/modules/firewall.sh "Configuring firewall rules"
+
+# Setup fail2ban
+$SCRIPT_DIR/modules/fail2ban.sh "Setting up fail2ban"
+
+# Configure system auditing
+$SCRIPT_DIR/modules/auditing.sh "Configuring system auditing"
+
+# Setup DNS
+$SCRIPT_DIR/modules/dns_config.sh "Configuring DNS settings"
+
+# Configure NTP
+$SCRIPT_DIR/modules/ntp.sh "Configuring NTP"
+
+# Setup automatic updates
+$SCRIPT_DIR/modules/auto_updates.sh "Setting up automatic updates"
+
+# Install and configure ClamAV
+$SCRIPT_DIR/modules/antivirus.sh "Installing and configuring ClamAV"
+
+# Setup custom prompt
+$SCRIPT_DIR/modules/custom_prompt.sh "Setting up custom system prompt"
+
+# Install GLPI agent
+$SCRIPT_DIR/modules/glpi_agent.sh "Installing GLPI agent"
+
+# Install Wazuh agent
+$SCRIPT_DIR/modules/wazuh_agent.sh "Installing Wazuh agent"
+
+# Setup monitoring (SNMP and NRPE)
+$SCRIPT_DIR/modules/monitoring.sh "Setting up monitoring services"
+
+# Apply additional security measures
+$SCRIPT_DIR/modules/additional_hardening.sh "Applying additional security measures"
+
+# Display completion message
+echo
+log_message "SUCCESS" "Security hardening completed successfully!"
+echo "Log file available at: $LOG_FILE"
+echo "System backup files stored at: $BACKUP_DIR"
+echo
+
+exit 0
\ No newline at end of file
diff --git a/test/modules/additional_hardening.sh b/test/modules/additional_hardening.sh
new file mode 100644
index 0000000..739af40
--- /dev/null
+++ b/test/modules/additional_hardening.sh
@@ -0,0 +1,344 @@
+#!/bin/bash
+# =============================================================================
+# Additional security hardening module
+# =============================================================================
+
+# Set script directory
+SCRIPT_DIR="$(cd "$(dirname "${BASH_SOURCE[0]}")" && pwd)"
+
+# Source common functions and variables
+source "./common.sh"
+
+# Function to harden system settings
+harden_system_settings() {
+  log_message "INFO" "Applying additional system hardening measures"
+  
+  # Backup sysctl.conf
+  backup_file "/etc/sysctl.conf"
+  
+  # Create custom sysctl security settings
+  local sysctl_security="/etc/sysctl.d/10-security-hardening.conf"
+  
+  log_message "INFO" "Creating security sysctl configuration"
+  
+  cat > "$sysctl_security" << EOF
+# Security hardening sysctl settings
+# Generated by security hardening script
+
+# IP Spoofing protection
+net.ipv4.conf.all.rp_filter = 1
+net.ipv4.conf.default.rp_filter = 1
+
+# Ignore ICMP broadcast requests
+net.ipv4.icmp_echo_ignore_broadcasts = 1
+
+# Disable source packet routing
+net.ipv4.conf.all.accept_source_route = 0
+net.ipv4.conf.default.accept_source_route = 0
+net.ipv6.conf.all.accept_source_route = 0
+net.ipv6.conf.default.accept_source_route = 0
+
+# Ignore send redirects
+net.ipv4.conf.all.send_redirects = 0
+net.ipv4.conf.default.send_redirects = 0
+
+# Block SYN attacks
+net.ipv4.tcp_syncookies = 1
+net.ipv4.tcp_syn_retries = 5
+net.ipv4.tcp_synack_retries = 2
+net.ipv4.tcp_max_syn_backlog = 4096
+
+# Log Martians
+net.ipv4.conf.all.log_martians = 1
+net.ipv4.conf.default.log_martians = 1
+
+# Ignore ICMP redirects
+net.ipv4.conf.all.accept_redirects = 0
+net.ipv4.conf.default.accept_redirects = 0
+net.ipv6.conf.all.accept_redirects = 0
+net.ipv6.conf.default.accept_redirects = 0
+
+# Ignore Directed pings
+net.ipv4.icmp_echo_ignore_all = 0
+
+# Protect against time-wait assassination
+net.ipv4.tcp_rfc1337 = 1
+
+# Increase system file descriptor limit
+fs.file-max = 65535
+
+# Increase system IP port limits
+net.ipv4.ip_local_port_range = 2000 65000
+
+# Protect against kernel memory exposure
+kernel.kptr_restrict = 2
+
+# Restrict dmesg access
+kernel.dmesg_restrict = 1
+
+# Restrict access to kernel pointers
+kernel.kptr_restrict = 2
+
+# Restrict kernel performance events
+kernel.perf_event_paranoid = 3
+
+# Protect against ptrace process attach
+kernel.yama.ptrace_scope = 1
+
+# Protect against SUID process core dumps
+fs.suid_dumpable = 0
+
+# Protect against core dumps
+kernel.core_pattern = |/bin/false
+
+# Disable IPv6 if not needed
+# net.ipv6.conf.all.disable_ipv6 = 1
+# net.ipv6.conf.default.disable_ipv6 = 1
+# net.ipv6.conf.lo.disable_ipv6 = 1
+EOF
+
+  log_message "SUCCESS" "Security sysctl configuration created at $sysctl_security"
+  
+  # Apply sysctl settings
+  log_message "INFO" "Applying sysctl settings"
+  sysctl -p "$sysctl_security"
+  
+  # Harden PAM configuration
+  log_message "INFO" "Hardening PAM configuration"
+  
+  # Configure password policies
+  local pwquality_conf="/etc/security/pwquality.conf"
+  
+  backup_file "$pwquality_conf"
+  
+  cat > "$pwquality_conf" << EOF
+# Password quality configuration
+# Generated by security hardening script
+
+# Minimum password length
+minlen = 12
+
+# Require at least one uppercase letter
+ucredit = -1
+
+# Require at least one lowercase letter
+lcredit = -1
+
+# Require at least one digit
+dcredit = -1
+
+# Require at least one special character
+ocredit = -1
+
+# Enforce password history (remember last 5 passwords)
+enforce_for_root
+remember = 5
+
+# Maximum number of allowed consecutive characters
+maxrepeat = 3
+
+# Minimum number of character classes
+minclass = 3
+
+# Check for dictionary words
+dictcheck = 1
+
+# Reject passwords shorter than 8 chars even with sufficient credit
+minlen = 8
+EOF
+
+  log_message "SUCCESS" "Password quality configuration created at $pwquality_conf"
+  
+  # Configure common-password
+  local common_password="/etc/pam.d/common-password"
+  
+  backup_file "$common_password"
+  
+  # Add pam_pwquality to common-password if not already present
+  if ! grep -q "pam_pwquality.so" "$common_password"; then
+    sed -i 's/pam_unix.so/pam_pwquality.so retry=3\npassword\t[success=1 default=ignore]\tpam_unix.so/' "$common_password"
+    log_message "SUCCESS" "Added pam_pwquality to $common_password"
+  fi
+  
+  # Configure login.defs for password aging
+  local login_defs="/etc/login.defs"
+  
+  backup_file "$login_defs"
+  
+  # Update password expiration settings
+  sed -i 's/^PASS_MAX_DAYS.*/PASS_MAX_DAYS   90/' "$login_defs"
+  sed -i 's/^PASS_MIN_DAYS.*/PASS_MIN_DAYS   1/' "$login_defs"
+  sed -i 's/^PASS_WARN_AGE.*/PASS_WARN_AGE   7/' "$login_defs"
+  
+  log_message "SUCCESS" "Updated password aging configuration in $login_defs"
+  
+  # Secure /tmp directory
+  log_message "INFO" "Securing temporary directories"
+  
+  # Create entries for mounting /tmp, /var/tmp, and /dev/shm with security options
+  local mount_options="defaults,nodev,nosuid,noexec"
+  
+  # Add entries to fstab if they don't already exist
+  if ! grep -q "tmpfs /tmp" /etc/fstab; then
+    echo "tmpfs /tmp tmpfs $mount_options 0 0" >> /etc/fstab
+    log_message "SUCCESS" "Added secure /tmp mount to fstab"
+  fi
+  
+  if ! grep -q "tmpfs /dev/shm" /etc/fstab; then
+    echo "tmpfs /dev/shm tmpfs $mount_options 0 0" >> /etc/fstab
+    log_message "SUCCESS" "Added secure /dev/shm mount to fstab"
+  fi
+  
+  if ! grep -q "/tmp /var/tmp" /etc/fstab; then
+    echo "/tmp /var/tmp none bind 0 0" >> /etc/fstab
+    log_message "SUCCESS" "Added /var/tmp bind mount to fstab"
+  fi
+  
+  # Disable uncommon network protocols
+  log_message "INFO" "Disabling uncommon network protocols"
+  
+  local disabled_modules="/etc/modprobe.d/disablemod.conf"
+  
+  cat > "$disabled_modules" << EOF
+# Disable uncommon network protocols
+# Generated by security hardening script
+
+# Disable uncommon protocols
+install dccp /bin/false
+install sctp /bin/false
+install rds /bin/false
+install tipc /bin/false
+install cramfs /bin/false
+install freevxfs /bin/false
+install jffs2 /bin/false
+install hfs /bin/false
+install hfsplus /bin/false
+install squashfs /bin/false
+install udf /bin/false
+EOF
+
+  log_message "SUCCESS" "Disabled uncommon network protocols in $disabled_modules"
+  
+  # Configure process accounting
+  log_message "INFO" "Configuring process accounting"
+  
+  if ! is_package_installed "acct"; then
+    apt-get install -y acct
+    
+    if [ $? -eq 0 ]; then
+      systemctl enable acct
+      systemctl start acct
+      log_message "SUCCESS" "Process accounting (acct) installed and enabled"
+    else
+      log_message "ERROR" "Failed to install process accounting (acct)"
+    fi
+  else
+    log_message "INFO" "Process accounting (acct) is already installed"
+  fi
+  
+  # Configure system logging
+  log_message "INFO" "Configuring system logging"
+  
+  # Ensure rsyslog is installed
+  if ! is_package_installed "rsyslog"; then
+    apt-get install -y rsyslog
+    
+    if [ $? -ne 0 ]; then
+      log_message "ERROR" "Failed to install rsyslog"
+    fi
+  fi
+  
+  # Configure rsyslog
+  local rsyslog_security="/etc/rsyslog.d/50-security.conf"
+  
+  cat > "$rsyslog_security" << EOF
+# Security logging configuration
+# Generated by security hardening script
+
+# Log auth messages to a separate file
+auth,authpriv.*                 /var/log/auth.log
+
+# Log kernel messages to a separate file
+kern.*                          /var/log/kern.log
+
+# Log system warnings and errors
+*.warn;*.err                    /var/log/syslog
+*.crit                          /var/log/critical
+
+# Log all failed login attempts
+auth,authpriv.warn              /var/log/faillog
+
+# Log sudo usage
+local2.*                        /var/log/sudo.log
+
+# Remote logging - uncomment and set your log server
+#*.* @logserver.example.com:514
+EOF
+
+  log_message "SUCCESS" "Rsyslog security configuration created at $rsyslog_security"
+  
+  # Restart rsyslog
+  systemctl restart rsyslog
+  
+  # Configure log rotation
+  local logrotate_conf="/etc/logrotate.d/rsyslog-security"
+  
+  cat > "$logrotate_conf" << EOF
+# Log rotation for security logs
+# Generated by security hardening script
+
+/var/log/auth.log
+/var/log/kern.log
+/var/log/syslog
+/var/log/critical
+/var/log/faillog
+/var/log/sudo.log
+{
+    rotate 14
+    daily
+    missingok
+    notifempty
+    compress
+    delaycompress
+    sharedscripts
+    postrotate
+        /usr/lib/rsyslog/rsyslog-rotate
+    endscript
+    create 0640 syslog adm
+}
+EOF
+
+  log_message "SUCCESS" "Log rotation configuration created at $logrotate_conf"
+  
+  # Set secure file permissions
+  log_message "INFO" "Setting secure file permissions"
+  
+  # Secure /etc/shadow
+  chmod 0600 /etc/shadow
+  
+  # Secure SSH keys
+  if [ -d "/etc/ssh" ]; then
+    chmod 0700 /etc/ssh
+    chmod 0600 /etc/ssh/*key
+  fi
+  
+  # Remove unused accounts
+  log_message "INFO" "Checking for unused accounts"
+  
+  local system_accounts="games gnats irc list news sync uucp"
+  
+  for account in $system_accounts; do
+    if id "$account" &>/dev/null; then
+      log_message "INFO" "Locking unused account: $account"
+      passwd -l "$account"
+      usermod -s /usr/sbin/nologin "$account"
+    fi
+  done
+  
+  log_message "SUCCESS" "System accounts secured"
+}
+
+# Main execution for additional hardening
+harden_system_settings
+
+log_message "SUCCESS" "Additional hardening measures completed"
\ No newline at end of file
diff --git a/test/modules/antivirus.sh b/test/modules/antivirus.sh
new file mode 100644
index 0000000..bdac7cb
--- /dev/null
+++ b/test/modules/antivirus.sh
@@ -0,0 +1,116 @@
+#!/bin/bash
+# =============================================================================
+# Antivirus configuration module
+# =============================================================================
+
+# Set script directory
+SCRIPT_DIR="$(cd "$(dirname "${BASH_SOURCE[0]}")" && pwd)"
+
+# Source common functions and variables
+source "./common.sh"
+
+# Function to install and configure ClamAV
+configure_clamav() {
+  log_message "INFO" "Installing and configuring ClamAV antivirus"
+  
+  # Install ClamAV if not already installed
+  if ! is_package_installed "clamav" || ! is_package_installed "clamav-daemon"; then
+    log_message "INFO" "Installing ClamAV and related packages"
+    apt-get install -y clamav clamav-daemon clamav-freshclam
+    
+    if [ $? -ne 0 ]; then
+      log_message "ERROR" "Failed to install ClamAV"
+      return 1
+    fi
+  else
+    log_message "INFO" "ClamAV is already installed"
+  fi
+  
+  # Configure ClamAV
+  local freshclam_conf="/etc/clamav/freshclam.conf"
+  
+  log_message "INFO" "Configuring ClamAV"
+  backup_file "$freshclam_conf"
+  
+  # Stop ClamAV services to update configuration
+  systemctl stop clamav-freshclam
+  systemctl stop clamav-daemon
+  
+  # Configure freshclam (virus database updater)
+  sed -i 's/^Example/#Example/' "$freshclam_conf"
+  sed -i 's/^Checks.*/Checks 24/' "$freshclam_conf"
+  sed -i 's/^DatabaseMirror.*/DatabaseMirror db.local.clamav.net/' "$freshclam_conf"
+  
+  log_message "SUCCESS" "ClamAV freshclam configuration updated"
+  
+  # Create a daily scan script
+  local scan_script="/etc/cron.daily/clamscan"
+  
+  log_message "INFO" "Creating daily scan script"
+  
+  cat > "$scan_script" << 'EOF'
+#!/bin/bash
+
+# ClamAV daily scan script
+# Generated by security hardening script
+
+# Set log file
+LOG_FILE="/var/log/clamav/daily_scan.log"
+SCAN_DIR="/"
+EXCLUDE_DIRS=("/sys" "/proc" "/dev" "/media" "/mnt" "/run" "/var/lib/clamav")
+
+# Create log directory if it doesn't exist
+mkdir -p /var/log/clamav
+
+# Start log
+echo "ClamAV daily scan started at $(date)" > "$LOG_FILE"
+
+# Build exclude parameters
+EXCLUDES=""
+for dir in "${EXCLUDE_DIRS[@]}"; do
+  EXCLUDES="$EXCLUDES --exclude-dir=$dir"
+done
+
+# Run scan
+clamscan -r $EXCLUDES --infected --detect-pua=yes --log="$LOG_FILE" --append "$SCAN_DIR"
+
+# Email report if infected files found
+INFECTED=$(grep -c "Infected files" "$LOG_FILE")
+if [ "$INFECTED" -gt 0 ]; then
+  echo "Virus detected! See log at $LOG_FILE" | mail -s "ClamAV Virus Alert" root
+fi
+
+# End log
+echo "ClamAV daily scan completed at $(date)" >> "$LOG_FILE"
+EOF
+
+  chmod +x "$scan_script"
+  log_message "SUCCESS" "ClamAV daily scan script created at $scan_script"
+  
+  # Restart ClamAV services
+  log_message "INFO" "Starting ClamAV services"
+  systemctl start clamav-freshclam
+  systemctl start clamav-daemon
+  
+  if [ $? -eq 0 ]; then
+    log_message "SUCCESS" "ClamAV services started successfully"
+  else
+    log_message "ERROR" "Failed to start ClamAV services"
+    return 1
+  fi
+  
+  # Update virus database
+  log_message "INFO" "Updating ClamAV virus database"
+  freshclam
+  
+  if [ $? -eq 0 ]; then
+    log_message "SUCCESS" "ClamAV virus database updated successfully"
+  else
+    log_message "WARNING" "ClamAV virus database update encountered issues"
+  fi
+}
+
+# Main execution for antivirus
+configure_clamav
+
+log_message "SUCCESS" "Antivirus configuration completed"
\ No newline at end of file
diff --git a/test/modules/auditing.sh b/test/modules/auditing.sh
new file mode 100644
index 0000000..d94fb67
--- /dev/null
+++ b/test/modules/auditing.sh
@@ -0,0 +1,126 @@
+#!/bin/bash
+# =============================================================================
+# System auditing configuration module
+# =============================================================================
+
+# Set script directory
+SCRIPT_DIR="$(cd "$(dirname "${BASH_SOURCE[0]}")" && pwd)"
+
+# Source common functions and variables
+source "./common.sh"
+
+# Function to install and configure auditd
+configure_auditd() {
+  log_message "INFO" "Installing and configuring auditd"
+  
+  # Install auditd if not already installed
+  if ! is_package_installed "auditd"; then
+    apt-get install -y auditd audispd-plugins
+    
+    if [ $? -ne 0 ]; then
+      log_message "ERROR" "Failed to install auditd"
+      return 1
+    fi
+  else
+    log_message "INFO" "auditd is already installed"
+  fi
+  
+  # Configure auditd
+  local audit_rules="/etc/audit/rules.d/audit.rules"
+  
+  log_message "INFO" "Creating audit rules"
+  backup_file "$audit_rules"
+  
+  cat > "$audit_rules" << 'EOF'
+# Audit configuration
+# Hardened audit rules
+
+# Delete all existing rules
+-D
+
+# Set buffer size
+-b 8192
+
+# Failure mode: 1=silent, 2=printk
+-f 1
+
+# Enable kernel auditing
+-e 1
+
+# Authentication and authorization
+-w /etc/pam.d/ -p wa -k pam
+-w /etc/nsswitch.conf -p wa -k nsswitch
+-w /etc/shadow -p wa -k shadow
+-w /etc/passwd -p wa -k passwd
+-w /etc/group -p wa -k group
+-w /etc/sudoers -p wa -k sudoers
+-w /etc/sudoers.d/ -p wa -k sudoers
+
+# System startup and shutdown
+-w /sbin/shutdown -p x -k power
+-w /sbin/reboot -p x -k power
+-w /sbin/halt -p x -k power
+
+# Kernel modules
+-w /sbin/insmod -p x -k modules
+-w /sbin/rmmod -p x -k modules
+-w /sbin/modprobe -p x -k modules
+
+# User, group, password modifications
+-w /usr/sbin/useradd -p x -k user_modification
+-w /usr/sbin/userdel -p x -k user_modification
+-w /usr/sbin/usermod -p x -k user_modification
+-w /usr/sbin/groupadd -p x -k group_modification
+-w /usr/sbin/groupdel -p x -k group_modification
+-w /usr/sbin/groupmod -p x -k group_modification
+-w /usr/bin/passwd -p x -k password_modification
+
+# Network configuration
+-w /etc/network/ -p wa -k network
+-w /etc/sysconfig/network -p wa -k network
+-w /etc/hosts -p wa -k hosts
+-w /etc/hostname -p wa -k hostname
+
+# System time changes
+-a always,exit -F arch=b64 -S settimeofday -S adjtimex -S clock_settime -k time-change
+-a always,exit -F arch=b32 -S settimeofday -S adjtimex -S clock_settime -k time-change
+
+# Suspicious activities
+-w /usr/bin/wget -p x -k suspicious_activity
+-w /usr/bin/curl -p x -k suspicious_activity
+-w /usr/bin/base64 -p x -k suspicious_activity
+-w /bin/nc -p x -k suspicious_activity
+-w /bin/netcat -p x -k suspicious_activity
+-w /usr/bin/ncat -p x -k suspicious_activity
+-w /usr/bin/ssh -p x -k suspicious_activity
+-w /usr/bin/socat -p x -k suspicious_activity
+-w /usr/bin/wireshark -p x -k suspicious_activity
+-w /usr/bin/tshark -p x -k suspicious_activity
+
+# Command execution
+-a always,exit -F arch=b64 -S execve -k exec
+-a always,exit -F arch=b32 -S execve -k exec
+
+# Privilege escalation
+-a always,exit -F arch=b64 -S setuid -S setgid -k privilege_escalation
+-a always,exit -F arch=b32 -S setuid -S setgid -k privilege_escalation
+EOF
+
+  log_message "SUCCESS" "Audit rules created at $audit_rules"
+  
+  # Restart auditd service
+  log_message "INFO" "Restarting auditd service"
+  service auditd restart
+  
+  if [ $? -eq 0 ]; then
+    log_message "SUCCESS" "auditd service restarted successfully"
+  else
+    log_message "ERROR" "Failed to restart auditd service"
+    return 1
+  fi
+}
+
+# Main execution for auditing
+configure_auditd
+
+log_message "SUCCESS" "System auditing configuration completed"
\ No newline at end of file
diff --git a/test/modules/auto_updates.sh b/test/modules/auto_updates.sh
new file mode 100644
index 0000000..6d07b32
--- /dev/null
+++ b/test/modules/auto_updates.sh
@@ -0,0 +1,142 @@
+#!/bin/bash
+# =============================================================================
+# Automatic updates configuration module
+# =============================================================================
+
+# Set script directory
+SCRIPT_DIR="$(cd "$(dirname "${BASH_SOURCE[0]}")" && pwd)"
+
+# Source common functions and variables
+source "./common.sh"
+
+# Function to configure unattended-upgrades
+configure_auto_updates() {
+  log_message "INFO" "Configuring automatic security updates"
+  
+  # Install unattended-upgrades if not already installed
+  if ! is_package_installed "unattended-upgrades"; then
+    log_message "INFO" "Installing unattended-upgrades"
+    apt-get install -y unattended-upgrades apt-listchanges
+    
+    if [ $? -ne 0 ]; then
+      log_message "ERROR" "Failed to install unattended-upgrades"
+      return 1
+    fi
+  else
+    log_message "INFO" "unattended-upgrades is already installed"
+  fi
+  
+  # Configure unattended-upgrades
+  local unattended_conf="/etc/apt/apt.conf.d/50unattended-upgrades"
+  
+  log_message "INFO" "Creating unattended-upgrades configuration"
+  backup_file "$unattended_conf"
+  
+  cat > "$unattended_conf" << EOF
+// Unattended-Upgrades configuration
+// Generated by security hardening script
+
+// Automatically upgrade packages from these (origin:archive) pairs
+Unattended-Upgrade::Allowed-Origins {
+    "\${distro_id}:\${distro_codename}";
+    "\${distro_id}:\${distro_codename}-security";
+    "\${distro_id}ESMApps:\${distro_codename}-apps-security";
+    "\${distro_id}ESM:\${distro_codename}-infra-security";
+    "\${distro_id}:\${distro_codename}-updates";
+};
+
+// Package blacklist - packages that should never be automatically upgraded
+Unattended-Upgrade::Package-Blacklist {
+//    "vim";
+//    "libc6";
+//    "libc6-dev";
+//    "libc6-i686";
+};
+
+// Split the upgrade into smaller chunks to minimize downtime
+Unattended-Upgrade::MinimalSteps "true";
+
+// Install security updates automatically
+Unattended-Upgrade::DevRelease "false";
+
+// Automatically reboot if necessary
+Unattended-Upgrade::Automatic-Reboot "true";
+
+// Reboot time
+Unattended-Upgrade::Automatic-Reboot-Time "02:00";
+
+// Send email notifications if available
+Unattended-Upgrade::Mail "";
+
+// Only send mail on errors
+Unattended-Upgrade::MailOnlyOnError "true";
+
+// Remove unused kernel packages
+Unattended-Upgrade::Remove-Unused-Kernel-Packages "true";
+
+// Remove unused dependencies
+Unattended-Upgrade::Remove-Unused-Dependencies "true";
+
+// Verbose logging
+Unattended-Upgrade::Verbose "true";
+
+// Enable automatic updates
+APT::Periodic::Update-Package-Lists "1";
+APT::Periodic::Download-Upgradeable-Packages "1";
+APT::Periodic::AutocleanInterval "7";
+APT::Periodic::Unattended-Upgrade "1";
+EOF
+
+  log_message "SUCCESS" "unattended-upgrades configuration created at $unattended_conf"
+  
+  # Create a configuration file to enable automatic updates
+  local auto_upgrades="/etc/apt/apt.conf.d/20auto-upgrades"
+  
+  log_message "INFO" "Creating auto-upgrades configuration"
+  
+  cat > "$auto_upgrades" << EOF
+// Auto-upgrade configuration
+// Generated by security hardening script
+
+APT::Periodic::Update-Package-Lists "1";
+APT::Periodic::Download-Upgradeable-Packages "1";
+APT::Periodic::AutocleanInterval "7";
+APT::Periodic::Unattended-Upgrade "1";
+EOF
+
+  log_message "SUCCESS" "auto-upgrades configuration created at $auto_upgrades"
+  
+  # Configure apt-listchanges
+  local listchanges_conf="/etc/apt/listchanges.conf"
+  
+  log_message "INFO" "Creating apt-listchanges configuration"
+  backup_file "$listchanges_conf"
+  
+  cat > "$listchanges_conf" << EOF
+[apt]
+frontend=pager
+email_address=root
+confirm=0
+save_seen=/var/lib/apt/listchanges.db
+which=both
+EOF
+
+  log_message "SUCCESS" "apt-listchanges configuration created at $listchanges_conf"
+  
+  # Enable and start unattended-upgrades service
+  log_message "INFO" "Enabling unattended-upgrades service"
+  systemctl enable unattended-upgrades
+  systemctl restart unattended-upgrades
+  
+  if [ $? -eq 0 ]; then
+    log_message "SUCCESS" "unattended-upgrades service enabled and restarted successfully"
+  else
+    log_message "ERROR" "Failed to enable or restart unattended-upgrades service"
+    return 1
+  fi
+}
+
+# Main execution for automatic updates
+configure_auto_updates
+
+log_message "SUCCESS" "Automatic updates configuration completed"
\ No newline at end of file
diff --git a/test/modules/custom_prompt.sh b/test/modules/custom_prompt.sh
new file mode 100644
index 0000000..3ee28a0
--- /dev/null
+++ b/test/modules/custom_prompt.sh
@@ -0,0 +1,245 @@
+#!/bin/bash
+# =============================================================================
+# Custom prompt configuration module
+# =============================================================================
+
+# Set script directory
+SCRIPT_DIR="$(cd "$(dirname "${BASH_SOURCE[0]}")" && pwd)"
+
+# Source common functions and variables
+source "./common.sh"
+
+# Function to configure custom banner
+configure_custom_banner() {
+  log_message "INFO" "Configuring custom banner"
+
+  # Create custom banner file
+  local banner_file="/etc/banner"
+
+  log_message "INFO" "Creating custom banner file"
+
+  cat > "$banner_file" << 'EOF'
+
+  _______ _                ____   __     __  __ _
+ |__   __(_)              / __ \ / _|   |  \/  (_)
+    | |   _ _ __  ___ ___| |  | | |_ ___| \  / |_ _ __   ___
+    | |  | | '_ \/ __|___| |  | |  _|___| |\/| | | '_ \ / _ \
+    | |  | | |_) \__ \   | |__| | |     | |  | | | | | |  __/
+    |_|  |_| .__/|___/    \____/|_|     |_|  |_|_|_| |_|\___|
+           | |
+           |_|
+
+AVERTISSEMENT : L'accès à ce système est réservé aux utilisateurs
+dûment autorisés.
+
+Toute tentative d'accès, d'accès à ce système sans autorisation ou
+de maintien frauduleux dans ce système fera l'objet de poursuites
+conformément à la politique de Tips-Of-Mine.
+
+Tout utilisateur autorisé est informé et reconnaît que ses actions
+peuvent être enregistrées, conservées et auditées conformément aux
+chartes/politiques internes de aux chartes/politiques internes de
+Tips-Of-Mine.
+EOF
+
+  chmod +x "$banner_file"
+
+  local file="/etc/ssh/sshd_config"
+  local line=`grep -n "#Banner none" $file | cut -d ":" -f 1`
+
+  #echo $line
+
+  # Vérification de la présence de la ligne AuthorizedKeysFile
+  if [ -z "$line" ]; then
+      echo "#Banner none" | tee -a $file
+  else
+      sed -i ''$line'c\Banner /etc/banner' $file > /dev/null || handle_error "Échec de "
+  fi
+
+  #
+  line=`grep -n "#Banner none" $file | cut -d ":" -f 1` || handle_error "Échec de "
+
+  log_message "SUCCESS" "Custom banner file created at $banner_file"
+
+  # Source the prompt file to apply immediately
+  source "$banner_file"
+}
+
+# Function to configure custom profile
+configure_custom_profile() {
+  log_message "INFO" "Configuring custom profile"
+
+  # Create custom profile file
+  local profile_file="/etc/profile.d/custom-profile.sh"
+
+  log_message "INFO" "Creating custom profile file"
+
+  cat > "$profile_file" << 'EOF'
+#!/bin/bash
+# Custom secure server profile
+# Generated by security hardening script
+
+# Check if the terminal supports colors
+if [ -x /usr/bin/tput ] && tput setaf 1 >&/dev/null; then
+  # Color definitions
+  BLUE="\[\033[01;34m\]"
+  GREEN="\[\033[01;32m\]"
+  RED="\[\033[01;31m\]"
+  YELLOW="\[\033[01;33m\]"
+  PURPLE="\[\033[01;35m\]"
+  CYAN="\[\033[01;36m\]"
+  WHITE="\[\033[01;37m\]"
+  RESET="\[\033[00m\]"
+  BOLD="\[\033[01m\]"
+
+  # Get server IP
+  SERVER_IP=$(hostname -I | awk '{print $1}')
+
+  # Define symbols based on privilege
+  if [ "$(id -u)" -eq 0 ]; then
+    # Root user - red prompt
+    USER_COLOR=$RED
+    PROMPT_SYMBOL="#"
+  else
+    # Regular user - green prompt
+    USER_COLOR=$GREEN
+    PROMPT_SYMBOL="$"
+  fi
+
+  # Set the prompt
+  PS1="${BOLD}[${USER_COLOR}\u${RESET}${BOLD}@${CYAN}\h${RESET}${BOLD} ${YELLOW}\w${RESET}${BOLD}]${RESET}\\n${USER_COLOR}${PROMPT_SYMBOL}${RESET} "
+
+  # Show additional security information for root users
+  if [ "$(id -u)" -eq 0 ]; then
+    # Display system information
+    echo -e "\n${RED}ATTENTION: ROOT LOGIN${RESET}"
+    echo -e "${YELLOW}System Info:${RESET}"
+    echo -e "  ${CYAN}Hostname:${RESET} $(hostname)"
+    echo -e "  ${CYAN}IP Address:${RESET} ${SERVER_IP}"
+    echo -e "  ${CYAN}Kernel:${RESET} $(uname -r)"
+    echo -e "  ${CYAN}Uptime:${RESET} $(uptime -p | sed 's/up //')"
+    echo -e "  ${CYAN}Load:${RESET} $(cat /proc/loadavg | awk '{print $1 ", " $2 ", " $3}')"
+
+    # Show recent failed login attempts
+    FAILED_LOGINS=$(grep "Failed password" /var/log/auth.log | tail -5)
+    if [ ! -z "$FAILED_LOGINS" ]; then
+      echo -e "\n${YELLOW}Recent Failed Login Attempts:${RESET}"
+      echo -e "${RED}$(grep "Failed password" /var/log/auth.log | tail -5)${RESET}"
+    fi
+
+    echo -e "\n${RED}THIS IS A SECURED SERVER - ALL ACTIONS ARE LOGGED${RESET}\n"
+  fi
+else
+  # Simple prompt for terminals without color support
+  PS1="[\u@\h \W]\\$ "
+fi
+
+# Set some useful aliases
+alias ll='ls -la'
+alias l='ls -l'
+alias rm='rm -i'
+alias cp='cp -i'
+alias mv='mv -i'
+alias grep='grep --color=auto'
+EOF
+
+  chmod +x "$profile_file"
+
+  log_message "SUCCESS" "Custom profile file created at $profile_file"
+
+  # Source the profile file to apply immediately
+  source "$profile_file"
+}
+
+# Function to configure custom prompt
+configure_custom_prompt() {
+  log_message "INFO" "Configuring custom prompt"
+
+  # Create custom prompt file
+  local prompt_file="/etc/update-motd.d/00-basic"
+
+  log_message "INFO" "Creating custom prompt file"
+
+  cat > "$prompt_file" << 'EOF'
+#!/bin/bash
+
+# get load averages
+IFS=" " read LOAD1 LOAD5 LOAD15 <<<$(awk '{ print $1,$2,$3 }' /proc/loadavg)
+# get free memory
+IFS=" " read USED AVAIL TOTAL <<<$(free -htm | awk '/Mem/ { print $3,$7,$2 }')
+# get processes
+PROCESS=$(ps -eo user=|sort|uniq -c | awk '{ print $2 " " $1 }')
+PROCESS_ALL=$(echo "$PROCESS"| awk {'print $2'} | awk '{ SUM += $1} END { print SUM }')
+PROCESS_ROOT=$(echo "$PROCESS" | awk '/root/ { print $2}')
+PROCESS_USER=$(echo "$PROCESS" | awk '!/root/ { SUM += $2} END { print SUM }')
+# get processors
+PROCESSOR_NAME=$(awk -F": " '/model name/ { print $2 }' /proc/cpuinfo | head -1)
+PROCESSOR_COUNT=$(grep -ioPc 'processor\t:' /proc/cpuinfo)
+
+# colors
+W="\e[0;39m"
+G="\e[1;32m"
+R="\e[1;31m"
+dim="\e[2m"
+undim="\e[0m"
+
+echo -e "${W}System info:
+$W  Hostname$dim····$undim: $W${HOSTNAME}
+$W  Distro$dim······$undim: $W$(grep "PRETTY_NAME" /etc/*release | cut -d "=" -f 2- | sed 's/"//g')
+$W  Kernel$dim······$undim: $W$(uname -sr)
+$W  Uptime$dim······$undim: $W$(uptime -p)
+$W  Load$dim········$undim: $G$LOAD1$W (1m), $G$LOAD5$W (5m), $G$LOAD15$W (15m)
+$W  Processes$dim···$undim: $G$PROCESS_ROOT$W (root), $G$PROCESS_USER$W (user), $G$PROCESS_ALL$W (total)
+$W  CPU$dim·········$undim: $W$PROCESSOR_NAME ($G$PROCESSOR_COUNT$W vCPU)
+$W  Memory$dim······$undim: $G$USED$W used, $G$AVAIL$W avail, $G$TOTAL$W total"
+
+# config
+max_usage=90
+bar_width=50
+
+# disk usage: ignore zfs, squashfs & tmpfs
+printf "\nDisk usage:\n"
+
+while read line; do
+    # get disk usage
+    usage=$(echo "$line" | awk '{print $2}' | sed 's/%//')
+    used_width=$((($usage*$bar_width)/100))
+    # color is green if usage < max_usage, else red
+    if [ "${usage}" -ge "${max_usage}" ]; then
+        color=$R
+    else
+        color=$G
+    fi
+    # print green/red bar until used_width
+    bar="[${color}"
+    for ((i=0; i<$used_width; i++)); do
+        bar+="="
+    done
+    # print dimmmed bar until end
+    bar+="${W}${dim}"
+    for ((i=$used_width; i<$bar_width; i++)); do
+        bar+="·"
+    done
+    bar+="${undim}]"
+    # print usage line & bar
+    echo "${line}" | awk '{ printf("%-31s%+3s used out of %+4s\n", $1, $2, $3); }' | sed -e 's/^/  /'
+    echo -e "${bar}" | sed -e 's/^/  /'
+done < <(df -H -x zfs -x squashfs -x tmpfs -x devtmpfs -x overlay -x nfs -x nfs4 -x cifs --output=target,pcent,size | tail -n+2)
+
+printf "\n"
+EOF
+
+  chmod +x "$prompt_file"
+
+  log_message "SUCCESS" "Custom prompt file created at $prompt_file"
+
+  # Source the prompt file to apply immediately
+    source "$prompt_file"
+}
+
+# Main execution for custom prompt
+configure_custom_banner
+configure_custom_profile
+configure_custom_prompt
+
+log_message "SUCCESS" "Custom prompt configuration completed"
\ No newline at end of file
diff --git a/test/modules/dns_config.sh b/test/modules/dns_config.sh
new file mode 100644
index 0000000..0c108fe
--- /dev/null
+++ b/test/modules/dns_config.sh
@@ -0,0 +1,76 @@
+#!/bin/bash
+# =============================================================================
+# DNS configuration module
+# =============================================================================
+
+# Set script directory
+SCRIPT_DIR="$(cd "$(dirname "${BASH_SOURCE[0]}")" && pwd)"
+
+# Source common functions and variables
+source "./common.sh"
+
+# Function to configure DNS settings
+configure_dns() {
+  log_message "INFO" "Configuring DNS settings"
+  
+  # Backup current resolv.conf
+  backup_file "/etc/resolv.conf"
+  
+  # Create systemd-resolved configuration
+  local resolved_conf="/etc/systemd/resolved.conf"
+  
+  log_message "INFO" "Creating systemd-resolved configuration"
+  backup_file "$resolved_conf"
+  
+  cat > "$resolved_conf" << EOF
+[Resolve]
+# Google and Cloudflare DNS servers
+DNS=8.8.8.8 8.8.4.4 1.1.1.1 1.0.0.1
+# Use DNS over TLS if possible
+DNSOverTLS=opportunistic
+# Default search domains
+Domains=
+# Fallback DNS
+FallbackDNS=9.9.9.9 149.112.112.112
+# Cache DNS responses
+Cache=yes
+# Try IPv4 first, then IPv6
+DNSStubListener=yes
+ReadEtcHosts=yes
+EOF
+
+  log_message "SUCCESS" "systemd-resolved configuration created at $resolved_conf"
+  
+  # Restart systemd-resolved service
+  if systemctl is-active systemd-resolved >/dev/null 2>&1; then
+    log_message "INFO" "Restarting systemd-resolved service"
+    systemctl restart systemd-resolved
+    
+    if [ $? -eq 0 ]; then
+      log_message "SUCCESS" "systemd-resolved service restarted successfully"
+    else
+      log_message "ERROR" "Failed to restart systemd-resolved service"
+    fi
+  else
+    # If systemd-resolved is not active, create a static resolv.conf
+    log_message "INFO" "systemd-resolved not active, creating static resolv.conf"
+    
+    cat > "/etc/resolv.conf" << EOF
+# DNS configuration
+# Generated by security hardening script
+
+nameserver 8.8.8.8
+nameserver 1.1.1.1
+nameserver 8.8.4.4
+nameserver 1.0.0.1
+options edns0 timeout:2 rotate
+EOF
+
+    log_message "SUCCESS" "Static resolv.conf created"
+  fi
+}
+
+# Main execution for DNS configuration
+configure_dns
+
+log_message "SUCCESS" "DNS configuration completed"
\ No newline at end of file
diff --git a/test/modules/fail2ban.sh b/test/modules/fail2ban.sh
new file mode 100644
index 0000000..c5b51eb
--- /dev/null
+++ b/test/modules/fail2ban.sh
@@ -0,0 +1,96 @@
+#!/bin/bash
+# =============================================================================
+# Fail2ban configuration module
+# =============================================================================
+
+# Set script directory
+SCRIPT_DIR="$(cd "$(dirname "${BASH_SOURCE[0]}")" && pwd)"
+
+# Source common functions and variables
+source "./common.sh"
+
+# Function to install and configure fail2ban
+configure_fail2ban() {
+  log_message "INFO" "Installing fail2ban"
+
+  # Install fail2ban if not already installed
+  if ! is_package_installed "fail2ban"; then
+    apt-get install -y fail2ban
+
+    if [ $? -ne 0 ]; then
+      log_message "ERROR" "Failed to install fail2ban"
+      return 1
+    fi
+  else
+    log_message "INFO" "fail2ban is already installed"
+  fi
+
+  # Create fail2ban local configuration
+  local fail2ban_local="/etc/fail2ban/jail.local"
+
+  log_message "INFO" "Creating fail2ban configuration"
+  backup_file "$fail2ban_local"
+
+  cat > "$fail2ban_local" << EOF
+[DEFAULT]
+# Ban hosts for 1 hour
+bantime = 3600
+# Check for new failed login attempts every 10 minutes
+findtime = 600
+# Ban after 5 failures
+maxretry = 5
+# Use both iptables and nftables (if available)
+banaction = iptables-multiport
+banaction_allports = iptables-allports
+
+# Email notifications (uncomment and configure to enable)
+# mta = mail
+# sender = fail2ban@example.com
+# destemail = admin@example.com
+# action = %(action_mwl)s
+
+# SSH jail configuration (custom port)
+[sshd]
+enabled = true
+port = 2222
+filter = sshd
+logpath = /var/log/auth.log
+maxretry = 3
+bantime = 86400
+
+# HTTP jail
+[apache-auth]
+enabled = true
+port = http,https
+filter = apache-auth
+logpath = /var/log/apache2/error.log
+maxretry = 3
+
+# NGINX jail
+[nginx-http-auth]
+enabled = true
+port = http,https
+filter = nginx-http-auth
+logpath = /var/log/nginx/error.log
+maxretry = 3
+EOF
+
+  log_message "SUCCESS" "fail2ban configuration created at $fail2ban_local"
+
+  # Restart fail2ban service
+  log_message "INFO" "Restarting fail2ban service"
+  systemctl enable fail2ban
+  systemctl restart fail2ban
+
+  if [ $? -eq 0 ]; then
+    log_message "SUCCESS" "fail2ban service restarted successfully"
+  else
+    log_message "ERROR" "Failed to restart fail2ban service"
+    return 1
+  fi
+}
+
+# Main execution for fail2ban
+configure_fail2ban
+
+log_message "SUCCESS" "fail2ban configuration completed"
\ No newline at end of file
diff --git a/test/modules/firewall.sh b/test/modules/firewall.sh
new file mode 100644
index 0000000..5e28af6
--- /dev/null
+++ b/test/modules/firewall.sh
@@ -0,0 +1,72 @@
+#!/bin/bash
+# =============================================================================
+# Firewall configuration module
+# =============================================================================
+
+# Set script directory
+SCRIPT_DIR="$(cd "$(dirname "${BASH_SOURCE[0]}")" && pwd)"
+
+# Source common functions and variables
+source "./common.sh"
+
+# Function to configure UFW
+configure_ufw() {
+  log_message "INFO" "Configuring UFW firewall"
+
+  # Check if UFW is installed
+  if ! command_exists ufw; then
+    log_message "INFO" "Installing UFW"
+    apt-get install -y ufw
+    
+    if [ $? -ne 0 ]; then
+      log_message "ERROR" "Failed to install UFW"
+      return 1
+    fi
+  fi
+
+  # Reset UFW to default settings
+  log_message "INFO" "Resetting UFW to default settings"
+  ufw --force reset
+
+  # Set default policies
+  log_message "INFO" "Setting default UFW policies"
+  ufw default deny incoming
+  ufw default allow outgoing
+
+  # Allow SSH on custom port
+  log_message "INFO" "Allowing SSH on port 2222"
+  ufw allow 2222/tcp
+
+  # Allow HTTP/HTTPS for web services if needed
+  log_message "INFO" "Allowing HTTP/HTTPS ports"
+  ufw allow 80/tcp
+  ufw allow 443/tcp
+
+  # Allow SNMP for monitoring
+  log_message "INFO" "Allowing SNMP port for monitoring"
+  ufw allow 161/udp
+
+  # Allow NRPE for monitoring
+  log_message "INFO" "Allowing NRPE port for monitoring"
+  ufw allow 5666/tcp
+
+  # Enable UFW
+  log_message "INFO" "Enabling UFW"
+  echo "y" | ufw enable
+
+  if [ $? -eq 0 ]; then
+    log_message "SUCCESS" "UFW enabled successfully"
+  else
+    log_message "ERROR" "Failed to enable UFW"
+    return 1
+  fi
+
+  # Show UFW status
+  log_message "INFO" "UFW status:"
+  ufw status verbose
+}
+
+# Main execution for firewall
+configure_ufw
+
+log_message "SUCCESS" "Firewall configuration completed"
\ No newline at end of file
diff --git a/test/modules/glpi_agent.sh b/test/modules/glpi_agent.sh
new file mode 100644
index 0000000..5591a3b
--- /dev/null
+++ b/test/modules/glpi_agent.sh
@@ -0,0 +1,155 @@
+#!/bin/bash
+# =============================================================================
+# GLPI agent installation module
+# =============================================================================
+
+# Set script directory
+SCRIPT_DIR="$(cd "$(dirname "${BASH_SOURCE[0]}")" && pwd)"
+
+# Source common functions and variables
+source "./common.sh"
+
+# Function to install GLPI agent
+install_glpi_agent() {
+  log_message "INFO" "Installing GLPI agent"
+  
+  # Check if GLPI agent is already installed
+  if command_exists glpi-agent; then
+    log_message "INFO" "GLPI agent is already installed"
+    return 0
+  fi
+  
+  # Install dependencies
+  log_message "INFO" "Installing dependencies for GLPI agent"
+  apt-get install -y dmidecode hwdata ucf hdparm perl libuniversal-require-perl \
+    libxml-treepp-perl libyaml-perl libnet-cups-perl libnet-ip-perl libwww-perl \
+    libparse-edid-perl libproc-daemon-perl libfile-which-perl libhttp-daemon-perl \
+    libio-socket-ssl-perl libnet-snmp-perl libcrypt-des-perl libnet-nbname-perl \
+    libdigest-hmac-perl libfusioninventory-agent-task-network-perl
+  
+  if [ $? -ne 0 ]; then
+    log_message "ERROR" "Failed to install dependencies for GLPI agent"
+    return 1
+  fi
+  
+  # Determine the latest GLPI agent version and download URL for Debian/Ubuntu
+  log_message "INFO" "Determining latest GLPI agent version"
+  
+  # Determine system architecture
+  ARCH=$(dpkg --print-architecture)
+  
+  # Prepare GLPI agent installation
+  TEMP_DIR=$(mktemp -d)
+  cd "$TEMP_DIR" || return 1
+  
+  # Download the latest GLPI agent package
+  if [ "$ARCH" = "amd64" ]; then
+    DOWNLOAD_URL="https://github.com/glpi-project/glpi-agent/releases/download/1.4/glpi-agent_1.4-1_all.deb"
+  else
+    DOWNLOAD_URL="https://github.com/glpi-project/glpi-agent/releases/download/1.4/glpi-agent_1.4-1_all.deb"
+  fi
+  
+  log_message "INFO" "Downloading GLPI agent from $DOWNLOAD_URL"
+  wget "$DOWNLOAD_URL" -O glpi-agent.deb
+  
+  if [ $? -ne 0 ]; then
+    log_message "ERROR" "Failed to download GLPI agent"
+    rm -rf "$TEMP_DIR"
+    return 1
+  fi
+  
+  # Install the GLPI agent package
+  log_message "INFO" "Installing GLPI agent package"
+  dpkg -i glpi-agent.deb
+  
+  if [ $? -ne 0 ]; then
+    log_message "ERROR" "Failed to install GLPI agent package"
+    apt-get install -f -y  # Try to fix broken dependencies
+    dpkg -i glpi-agent.deb
+    
+    if [ $? -ne 0 ]; then
+      log_message "ERROR" "Failed to install GLPI agent package after fixing dependencies"
+      rm -rf "$TEMP_DIR"
+      return 1
+    fi
+  fi
+  
+  # Cleanup
+  cd - > /dev/null
+  rm -rf "$TEMP_DIR"
+  
+  # Configure GLPI agent
+  log_message "INFO" "Configuring GLPI agent"
+  
+  local glpi_conf="/etc/glpi-agent/agent.cfg"
+  
+  # Backup existing configuration if it exists
+  if [ -f "$glpi_conf" ]; then
+    backup_file "$glpi_conf"
+  fi
+  
+  # Create configuration file
+  cat > "$glpi_conf" << EOF
+# GLPI Agent Configuration
+# Generated by security hardening script
+
+# Server URL - Replace with your actual GLPI server URL
+server = http://glpi-server/glpi/api/inventory
+# Disable SSL certificate validation for testing (set to 1 for production)
+no-ssl-check = 0
+# Run as daemon (0 = no, 1 = yes)
+daemon = 1
+# Logger configuration
+logger = File
+logfile = /var/log/glpi-agent/glpi-agent.log
+# Scan local network
+scan-homedirs = 0
+scan-profiles = 0
+# Inventory frequency (in hours)
+delaytime = 24
+# Tag for the agent
+tag = SecuredServer
+EOF
+
+  log_message "SUCCESS" "GLPI agent configuration created at $glpi_conf"
+  
+  # Create GLPI agent systemd service if not already created by package
+  if [ ! -f "/etc/systemd/system/glpi-agent.service" ]; then
+    log_message "INFO" "Creating GLPI agent service"
+    
+    cat > "/etc/systemd/system/glpi-agent.service" << EOF
+[Unit]
+Description=GLPI Agent
+Documentation=https://glpi-agent.readthedocs.io/
+After=network.target
+
+[Service]
+ExecStart=/usr/bin/glpi-agent --daemon
+Restart=always
+RestartSec=60
+
+[Install]
+WantedBy=multi-user.target
+EOF
+
+    log_message "SUCCESS" "GLPI agent service created"
+  fi
+  
+  # Enable and start GLPI agent service
+  log_message "INFO" "Enabling and starting GLPI agent service"
+  systemctl daemon-reload
+  systemctl enable glpi-agent
+  systemctl restart glpi-agent
+  
+  if [ $? -eq 0 ]; then
+    log_message "SUCCESS" "GLPI agent service enabled and started"
+  else
+    log_message "ERROR" "Failed to enable or start GLPI agent service"
+    return 1
+  fi
+}
+
+# Main execution for GLPI agent
+install_glpi_agent
+
+log_message "SUCCESS" "GLPI agent installation completed"
\ No newline at end of file
diff --git a/test/modules/monitoring.sh b/test/modules/monitoring.sh
new file mode 100644
index 0000000..0dfab8d
--- /dev/null
+++ b/test/modules/monitoring.sh
@@ -0,0 +1,297 @@
+#!/bin/bash
+# =============================================================================
+# Monitoring configuration module (SNMP and NRPE)
+# =============================================================================
+
+# Set script directory
+SCRIPT_DIR="$(cd "$(dirname "${BASH_SOURCE[0]}")" && pwd)"
+
+# Source common functions and variables
+source "./common.sh"
+
+# Function to configure SNMP
+configure_snmp() {
+  log_message "INFO" "Configuring SNMP monitoring"
+  
+  # Install SNMP if not already installed
+  if ! is_package_installed "snmpd"; then
+    log_message "INFO" "Installing SNMP"
+    apt-get install -y snmpd snmp
+    
+    if [ $? -ne 0 ]; then
+      log_message "ERROR" "Failed to install SNMP"
+      return 1
+    fi
+  else
+    log_message "INFO" "SNMP is already installed"
+  fi
+  
+  # Configure SNMP
+  local snmpd_conf="/etc/snmp/snmpd.conf"
+  
+  log_message "INFO" "Creating SNMP configuration"
+  backup_file "$snmpd_conf"
+  
+  cat > "$snmpd_conf" << EOF
+# SNMP Configuration
+# Generated by security hardening script
+
+# Listen on localhost and specific network interface
+agentAddress udp:127.0.0.1:161,udp:161
+
+# Information about this host
+sysLocation    "Server Room"
+sysContact     admin@example.com
+sysName        $(hostname)
+sysDescr       "Linux $(uname -r) on $(uname -m)"
+
+# Authentication (replace with your own values)
+# Format: user_name security_name auth_protocol auth_passphrase priv_protocol priv_passphrase
+createUser authOnlyUser  MD5 "auth_pass_phrase"
+createUser authPrivUser  SHA "auth_pass_phrase" DES "priv_pass_phrase"
+
+# Grant access to SNMPv3 users
+rouser   authOnlyUser auth
+rouser   authPrivUser priv
+
+# Views
+view    systemonly   included    .1.3.6.1.2.1.1
+view    systemonly   included    .1.3.6.1.2.1.25.1
+
+# Grant only system information to SNMPv3 users
+access  grpAuthOnlyUser  ""      usm     auth    nopriv  exact   systemonly  none    none
+access  grpAuthPrivUser  ""      usm     auth    priv    exact   systemonly  none    none
+
+# Additional monitoring
+# Load averages
+extend load    /bin/cat   /proc/loadavg
+# Disk space
+extend dfspace /bin/df    -P
+
+# Disable older SNMP versions (only allow SNMPv3)
+disableSnmpv1d yes
+disableSnmpv2cd yes
+
+# Logging
+authtrapenable 1
+EOF
+
+  log_message "SUCCESS" "SNMP configuration created at $snmpd_conf"
+  
+  # Create SNMP client configuration example
+  local snmp_client_conf="/root/snmp-client-example.txt"
+  
+  log_message "INFO" "Creating SNMP client configuration example"
+  
+  cat > "$snmp_client_conf" << EOF
+# SNMP Client Configuration Example
+# Generated by security hardening script
+
+# Add the following to your SNMP client configuration to connect to this server
+
+# SNMPv3 with authentication
+# Replace SERVER_IP with the IP address of this server
+snmpwalk -v 3 -u authOnlyUser -a MD5 -A "auth_pass_phrase" SERVER_IP
+
+# SNMPv3 with authentication and privacy
+# Replace SERVER_IP with the IP address of this server
+snmpwalk -v 3 -u authPrivUser -a SHA -A "auth_pass_phrase" -x DES -X "priv_pass_phrase" SERVER_IP
+EOF
+
+  log_message "SUCCESS" "SNMP client configuration example created at $snmp_client_conf"
+  
+  # Restart SNMP service
+  log_message "INFO" "Restarting SNMP service"
+  systemctl enable snmpd
+  systemctl restart snmpd
+  
+  if [ $? -eq 0 ]; then
+    log_message "SUCCESS" "SNMP service restarted successfully"
+  else
+    log_message "ERROR" "Failed to restart SNMP service"
+    return 1
+  fi
+}
+
+# Function to configure NRPE
+configure_nrpe() {
+  log_message "INFO" "Configuring NRPE monitoring"
+  
+  # Install NRPE if not already installed
+  if ! is_package_installed "nagios-nrpe-server"; then
+    log_message "INFO" "Installing NRPE and monitoring plugins"
+    apt-get install -y nagios-nrpe-server nagios-plugins
+    
+    if [ $? -ne 0 ]; then
+      log_message "ERROR" "Failed to install NRPE"
+      return 1
+    fi
+  else
+    log_message "INFO" "NRPE is already installed"
+  fi
+  
+  # Configure NRPE
+  local nrpe_conf="/etc/nagios/nrpe.conf"
+  
+  log_message "INFO" "Creating NRPE configuration"
+  backup_file "$nrpe_conf"
+  
+  cat > "$nrpe_conf" << EOF
+# NRPE Configuration
+# Generated by security hardening script
+
+# Log facility to use
+log_facility=daemon
+
+# Log level
+debug=0
+
+# Run as this user
+nrpe_user=nagios
+nrpe_group=nagios
+
+# NRPE port
+server_port=5666
+
+# NRPE server address (listen on all interfaces)
+server_address=0.0.0.0
+
+# Allow connections from these monitoring servers (replace with your Nagios server IP)
+allowed_hosts=127.0.0.1,NAGIOS_SERVER_IP
+
+# Connection restrictions
+dont_blame_nrpe=0
+allow_bash_command_substitution=0
+
+# Command timeout
+command_timeout=60
+connection_timeout=300
+
+# SSL/TLS options
+ssl_version=TLSv1.2+
+use_ssl=1
+
+# Command definitions
+
+# Basic system checks
+command[check_users]=/usr/lib/nagios/plugins/check_users -w 5 -c 10
+command[check_load]=/usr/lib/nagios/plugins/check_load -w 15,10,5 -c 30,25,20
+command[check_disk]=/usr/lib/nagios/plugins/check_disk -w 20% -c 10% -p /
+command[check_zombie_procs]=/usr/lib/nagios/plugins/check_procs -w 5 -c 10 -s Z
+command[check_total_procs]=/usr/lib/nagios/plugins/check_procs -w 150 -c 200
+command[check_mem]=/usr/lib/nagios/plugins/check_mem -w 80 -c 90
+
+# Network checks
+command[check_ssh]=/usr/lib/nagios/plugins/check_ssh -p 2222 localhost
+command[check_http]=/usr/lib/nagios/plugins/check_http localhost
+command[check_ping]=/usr/lib/nagios/plugins/check_ping -H 8.8.8.8 -w 100.0,20% -c 500.0,60%
+
+# Service checks
+command[check_ntp]=/usr/lib/nagios/plugins/check_ntp_time -H pool.ntp.org -w 0.5 -c 1
+EOF
+
+  log_message "SUCCESS" "NRPE configuration created at $nrpe_conf"
+  
+  # Install memory check plugin if it doesn't exist
+  if [ ! -f "/usr/lib/nagios/plugins/check_mem" ]; then
+    log_message "INFO" "Installing memory check plugin for NRPE"
+    
+    cat > "/usr/lib/nagios/plugins/check_mem" << 'EOF'
+#!/bin/bash
+# Check memory usage plugin for Nagios
+
+# Defaults
+WARNING=80
+CRITICAL=90
+
+# Process arguments
+while getopts "w:c:" opt; do
+  case $opt in
+    w) WARNING=$OPTARG ;;
+    c) CRITICAL=$OPTARG ;;
+    *) echo "Usage: $0 -w warning_percent -c critical_percent"; exit 3 ;;
+  esac
+done
+
+# Get memory information
+MEM_TOTAL=$(free -m | grep "Mem:" | awk '{print $2}')
+MEM_FREE=$(free -m | grep "Mem:" | awk '{print $4+$6+$7}')
+MEM_USED=$((MEM_TOTAL - MEM_FREE))
+MEM_PERCENT=$((MEM_USED * 100 / MEM_TOTAL))
+
+# Perform check
+if [ $MEM_PERCENT -ge $CRITICAL ]; then
+  echo "CRITICAL - Memory usage: $MEM_PERCENT% ($MEM_USED MB of $MEM_TOTAL MB) | memory=$MEM_PERCENT%;$WARNING;$CRITICAL;0;100"
+  exit 2
+elif [ $MEM_PERCENT -ge $WARNING ]; then
+  echo "WARNING - Memory usage: $MEM_PERCENT% ($MEM_USED MB of $MEM_TOTAL MB) | memory=$MEM_PERCENT%;$WARNING;$CRITICAL;0;100"
+  exit 1
+else
+  echo "OK - Memory usage: $MEM_PERCENT% ($MEM_USED MB of $MEM_TOTAL MB) | memory=$MEM_PERCENT%;$WARNING;$CRITICAL;0;100"
+  exit 0
+fi
+EOF
+
+    chmod +x "/usr/lib/nagios/plugins/check_mem"
+    log_message "SUCCESS" "Memory check plugin installed for NRPE"
+  fi
+  
+  # Create NRPE setup documentation
+  local nrpe_doc="/root/nrpe-setup-documentation.txt"
+  
+  log_message "INFO" "Creating NRPE setup documentation"
+  
+  cat > "$nrpe_doc" << EOF
+# NRPE Setup Documentation
+# Generated by security hardening script
+
+To complete the NRPE setup:
+
+1. Edit the NRPE configuration file: $nrpe_conf
+   - Replace "NAGIOS_SERVER_IP" with the IP address of your Nagios server
+   - Add any additional custom commands you need
+
+2. Restart the NRPE service:
+   systemctl restart nagios-nrpe-server
+
+3. On your Nagios server, add this host with commands like:
+   check_nrpe -H SERVER_IP -c check_load
+   check_nrpe -H SERVER_IP -c check_disk
+   check_nrpe -H SERVER_IP -c check_mem
+
+4. Remember to open port 5666 in the firewall if you need to connect from a remote Nagios server:
+   ufw allow 5666/tcp
+
+5. Available commands:
+   - check_users: Checks number of logged-in users
+   - check_load: Checks system load
+   - check_disk: Checks disk usage
+   - check_zombie_procs: Checks for zombie processes
+   - check_total_procs: Checks total number of processes
+   - check_mem: Checks memory usage
+   - check_ssh: Checks SSH service
+   - check_http: Checks HTTP service
+   - check_ping: Checks network connectivity
+   - check_ntp: Checks NTP synchronization
+EOF
+
+  log_message "SUCCESS" "NRPE setup documentation created at $nrpe_doc"
+  
+  # Restart NRPE service
+  log_message "INFO" "Restarting NRPE service"
+  systemctl enable nagios-nrpe-server
+  systemctl restart nagios-nrpe-server
+  
+  if [ $? -eq 0 ]; then
+    log_message "SUCCESS" "NRPE service restarted successfully"
+  else
+    log_message "ERROR" "Failed to restart NRPE service"
+    return 1
+  fi
+}
+
+# Main execution for monitoring
+configure_snmp
+configure_nrpe
+
+log_message "SUCCESS" "Monitoring configuration completed"
\ No newline at end of file
diff --git a/test/modules/ntp.sh b/test/modules/ntp.sh
new file mode 100644
index 0000000..1b0f3f2
--- /dev/null
+++ b/test/modules/ntp.sh
@@ -0,0 +1,103 @@
+#!/bin/bash
+# =============================================================================
+# NTP configuration module
+# =============================================================================
+
+# Set script directory
+SCRIPT_DIR="$(cd "$(dirname "${BASH_SOURCE[0]}")" && pwd)"
+
+# Source common functions and variables
+source "./common.sh"
+
+# Function to configure NTP
+configure_ntp() {
+  log_message "INFO" "Configuring NTP"
+  
+  # Install chrony if not already installed
+  if ! is_package_installed "chrony"; then
+    log_message "INFO" "Installing chrony NTP service"
+    apt-get install -y chrony
+    
+    if [ $? -ne 0 ]; then
+      log_message "ERROR" "Failed to install chrony"
+      return 1
+    fi
+  else
+    log_message "INFO" "chrony is already installed"
+  fi
+  
+  # Configure chrony
+  local chrony_conf="/etc/chrony/chrony.conf"
+  
+  log_message "INFO" "Creating chrony configuration"
+  backup_file "$chrony_conf"
+  
+  cat > "$chrony_conf" << EOF
+# Chrony NTP configuration
+# Generated by security hardening script
+
+# Use the NTP pool for time synchronization
+pool 0.pool.ntp.org iburst
+pool 1.pool.ntp.org iburst
+pool 2.pool.ntp.org iburst
+pool 3.pool.ntp.org iburst
+
+# Record the rate at which the system clock gains/losses time
+driftfile /var/lib/chrony/drift
+
+# Allow the system clock to be stepped in the first three updates
+makestep 1.0 3
+
+# Enable kernel synchronization of the real-time clock (RTC)
+rtcsync
+
+# Serve time even if not synchronized to a time source
+local stratum 10
+
+# Specify file containing NTP authentication keys
+keyfile /etc/chrony/chrony.keys
+
+# Specify directory for log files
+logdir /var/log/chrony
+
+# Select which information is logged
+log tracking measurements statistics
+
+# Security settings
+# Disable remote control and monitoring
+cmdport 0
+
+# Only allow localhost to synchronize with this server
+allow 127.0.0.1
+deny all
+EOF
+
+  log_message "SUCCESS" "chrony configuration created at $chrony_conf"
+  
+  # Restart chrony service
+  log_message "INFO" "Restarting chrony service"
+  systemctl enable chrony
+  systemctl restart chrony
+  
+  if [ $? -eq 0 ]; then
+    log_message "SUCCESS" "chrony service restarted successfully"
+  else
+    log_message "ERROR" "Failed to restart chrony service"
+    return 1
+  fi
+  
+  # Set hardware clock to UTC
+  log_message "INFO" "Setting hardware clock to UTC"
+  timedatectl set-local-rtc 0
+  
+  if [ $? -eq 0 ]; then
+    log_message "SUCCESS" "Hardware clock set to UTC"
+  else
+    log_message "ERROR" "Failed to set hardware clock to UTC"
+  fi
+}
+
+# Main execution for NTP configuration
+configure_ntp
+
+log_message "SUCCESS" "NTP configuration completed"
\ No newline at end of file
diff --git a/test/modules/package_management.sh b/test/modules/package_management.sh
new file mode 100644
index 0000000..081b656
--- /dev/null
+++ b/test/modules/package_management.sh
@@ -0,0 +1,151 @@
+#!/bin/bash
+# =============================================================================
+# Package management module
+# =============================================================================
+
+# Set script directory
+SCRIPT_DIR="$(cd "$(dirname "${BASH_SOURCE[0]}")" && pwd)"
+
+# Source common functions and variables
+source "./common.sh"
+
+# Function to configure APT with proxy settings if needed
+configure_apt_proxy() {
+  local proxy_file="/etc/apt/apt.conf.d/90proxy"
+  local proxy_doc="/root/apt-proxy-documentation.txt"
+
+  log_message "INFO" "Creating APT proxy documentation at $proxy_doc"
+
+  cat > "$proxy_doc" << EOF
+# APT Proxy Configuration
+# To configure APT to use a proxy, edit the file /etc/apt/apt.conf.d/90proxy
+# and add one of the following configurations:
+
+# HTTP proxy
+Acquire::http::Proxy "http://username:password@proxy.example.com:8080/";
+
+# HTTPS proxy
+Acquire::https::Proxy "http://username:password@proxy.example.com:8080/";
+
+# For APT to use the system's proxy settings
+Acquire::http::Proxy "http://${http_proxy}";
+Acquire::https::Proxy "http://${https_proxy}";
+
+# To disable proxy for specific hosts
+Acquire::http::Proxy::hostname.example.com "DIRECT";
+EOF
+
+  log_message "SUCCESS" "APT proxy documentation created. Edit $proxy_file to configure proxies if needed"
+}
+
+# Function to update package lists and upgrade installed packages
+update_upgrade_packages() {
+  log_message "INFO" "Updating package lists"
+  apt-get update
+
+  if [ $? -eq 0 ]; then
+    log_message "SUCCESS" "Package lists updated successfully"
+  else
+    log_message "ERROR" "Failed to update package lists"
+    return 1
+  fi
+
+  log_message "INFO" "Upgrading installed packages"
+  apt-get full-upgrade -y
+
+  if [ $? -eq 0 ]; then
+    log_message "SUCCESS" "Packages upgraded successfully"
+  else
+    log_message "ERROR" "Failed to upgrade packages"
+    return 1
+  fi
+}
+
+# Function to install essential security packages
+install_essential_packages() {
+  local packages=(
+    "apt-transport-https"
+    "ca-certificates"
+    "gnupg"
+    "software-properties-common"
+    "curl"
+    "wget"
+    "ufw"
+    "unattended-upgrades"
+    "apt-listchanges"
+  )
+
+  log_message "INFO" "Installing essential security packages"
+
+  for package in "${packages[@]}"; do
+    if ! is_package_installed "$package"; then
+      log_message "INFO" "Installing $package"
+      apt-get install -y "$package"
+
+      if [ $? -eq 0 ]; then
+        log_message "SUCCESS" "Installed $package successfully"
+      else
+        log_message "ERROR" "Failed to install $package"
+      fi
+    else
+      log_message "INFO" "$package is already installed"
+    fi
+  done
+}
+
+# Create a new package installation module
+cat > "$SCRIPT_DIR/install_packages.sh" << 'EOF'
+#!/bin/bash
+# =============================================================================
+# New package installation module
+# =============================================================================
+
+# Set script directory
+SCRIPT_DIR="$(cd "$(dirname "${BASH_SOURCE[0]}")" && pwd)"
+
+# Source common functions and variables
+source "./common.sh"
+
+# Function to install new packages safely
+install_new_packages() {
+  if [ $# -eq 0 ]; then
+    log_message "ERROR" "No packages specified for installation"
+    return 1
+  fi
+
+  log_message "INFO" "Installing new packages: $*"
+
+  # Update package lists first
+  apt-get update
+
+  if [ $? -ne 0 ]; then
+    log_message "ERROR" "Failed to update package lists"
+    return 1
+  fi
+
+  # Install the specified packages
+  apt-get install -y "$@"
+
+  if [ $? -eq 0 ]; then
+    log_message "SUCCESS" "Installed packages successfully: $*"
+    return 0
+  else
+    log_message "ERROR" "Failed to install packages: $*"
+    return 1
+  fi
+}
+
+# Usage example:
+# source "$SCRIPT_DIR/install_packages.sh"
+# install_new_packages package1 package2 package3
+EOF
+
+chmod +x "$SCRIPT_DIR/install_packages.sh"
+log_message "INFO" "Created new package installation module at $SCRIPT_DIR/install_packages.sh"
+
+# Main execution for package management
+configure_apt_proxy
+update_upgrade_packages
+install_essential_packages
+
+log_message "SUCCESS" "Package management configuration completed"
\ No newline at end of file
diff --git a/test/modules/ssh_hardening.sh b/test/modules/ssh_hardening.sh
new file mode 100644
index 0000000..316754b
--- /dev/null
+++ b/test/modules/ssh_hardening.sh
@@ -0,0 +1,168 @@
+#!/bin/bash
+# =============================================================================
+# SSH hardening module
+# =============================================================================
+
+# Set script directory
+SCRIPT_DIR="$(cd "$(dirname "${BASH_SOURCE[0]}")" && pwd)"
+
+# Source common functions and variables
+source "./common.sh"
+
+# Function to create SSH keys for root user
+create_root_ssh_keys() {
+  local ssh_dir="/root/.ssh"
+  local authorized_keys="$ssh_dir/authorized_keys"
+  local ssh_key_doc="/root/root-ssh-keys-documentation.txt"
+
+  # Create .ssh directory if it doesn't exist
+  mkdir -p "$ssh_dir"
+  chmod 700 "$ssh_dir"
+
+  # Create or backup authorized_keys file
+  if [ -f "$authorized_keys" ]; then
+    backup_file "$authorized_keys"
+  else
+    touch "$authorized_keys"
+  fi
+
+  chmod 600 "$authorized_keys"
+
+  # Create documentation
+  log_message "INFO" "Creating SSH key documentation for root user"
+
+  cat > "$ssh_key_doc" << EOF
+# Root SSH Keys Documentation
+# 
+# To add SSH public keys for root user, add them to the authorized_keys file:
+# $authorized_keys
+#
+# Format:
+# ssh-rsa AAAAB3NzaC1yc2EA... comment
+#
+# For security:
+# - Key-based authentication is more secure than password-based authentication
+# - Use strong, unique keys for each user or service
+# - Regularly rotate SSH keys
+# - Remove keys that are no longer needed
+#
+# Remember to maintain proper permissions:
+# chmod 700 $ssh_dir
+# chmod 600 $authorized_keys
+EOF
+
+  log_message "SUCCESS" "SSH key documentation for root user created at $ssh_key_doc"
+}
+
+# Function to create SSH keys for non-root users
+create_non_root_ssh_keys() {
+  local ssh_key_doc="/etc/skel/.ssh-documentation.txt"
+
+  # Create /etc/skel/.ssh directory
+  mkdir -p "/etc/skel/.ssh"
+  chmod 700 "/etc/skel/.ssh"
+  touch "/etc/skel/.ssh/authorized_keys"
+  chmod 600 "/etc/skel/.ssh/authorized_keys"
+
+  # Create documentation
+  log_message "INFO" "Creating SSH key documentation for non-root users"
+
+  cat > "$ssh_key_doc" << EOF
+# User SSH Keys Documentation
+#
+# To add SSH public keys for this user, add them to the authorized_keys file:
+# ~/.ssh/authorized_keys
+#
+# Format:
+# ssh-rsa AAAAB3NzaC1yc2EA... comment
+#
+# For security:
+# - Key-based authentication is more secure than password-based authentication
+# - Use strong, unique keys for each user or service
+# - Regularly rotate SSH keys
+# - Remove keys that are no longer needed
+#
+# Remember to maintain proper permissions:
+# chmod 700 ~/.ssh
+# chmod 600 ~/.ssh/authorized_keys
+EOF
+
+  log_message "SUCCESS" "SSH key documentation for non-root users created at $ssh_key_doc"
+}
+
+# Function to harden SSH configuration
+harden_ssh_config() {
+  local ssh_config="/etc/ssh/sshd_config"
+  local ssh_config_backup="$BACKUP_DIR/etc/ssh/sshd_config"
+
+  # Backup current SSH configuration
+  backup_file "$ssh_config"
+
+  log_message "INFO" "Hardening SSH configuration"
+
+  # Create a new SSH configuration with hardened settings
+  cat > "$ssh_config" << EOF
+# SSH Server Configuration
+# Hardened configuration from security script
+
+# Basic SSH server settings
+Port 2222
+AddressFamily inet
+ListenAddress 0.0.0.0
+
+# Authentication settings
+#AuthorizedKeysFile /root/.ssh/authorized_keys/%u
+PermitRootLogin prohibit-password
+PubkeyAuthentication yes
+PasswordAuthentication no
+PermitEmptyPasswords no
+ChallengeResponseAuthentication no
+UsePAM yes
+
+# Security settings
+X11Forwarding no
+PrintMotd no
+AcceptEnv LANG LC_*
+Subsystem sftp /usr/lib/openssh/sftp-server
+
+# Hardening options
+LoginGraceTime 30
+MaxAuthTries 3
+MaxSessions 5
+ClientAliveInterval 300
+ClientAliveCountMax 3
+
+# Disable weak crypto
+KexAlgorithms curve25519-sha256@libssh.org,diffie-hellman-group-exchange-sha256
+Ciphers chacha20-poly1305@openssh.com,aes256-gcm@openssh.com,aes128-gcm@openssh.com,aes256-ctr,aes192-ctr,aes128-ctr
+MACs hmac-sha2-512-etm@openssh.com,hmac-sha2-256-etm@openssh.com,hmac-sha2-512,hmac-sha2-256
+
+# Logging
+SyslogFacility AUTH
+LogLevel VERBOSE
+EOF
+
+  log_message "INFO" "Configured SSH to use port 2222 and disabled root password login"
+  log_message "SUCCESS" "SSH configuration hardened"
+
+  # Restart SSH service to apply changes
+  log_message "INFO" "Restarting SSH service"
+  systemctl restart sshd
+
+  if [ $? -eq 0 ]; then
+    log_message "SUCCESS" "SSH service restarted successfully"
+  else
+    log_message "ERROR" "Failed to restart SSH service"
+    # Revert to backup
+    cp "$ssh_config_backup" "$ssh_config"
+    systemctl restart sshd
+    log_message "WARNING" "Reverted to original SSH configuration"
+  fi
+}
+
+# Main execution for SSH hardening
+create_root_ssh_keys
+create_non_root_ssh_keys
+harden_ssh_config
+
+log_message "SUCCESS" "SSH hardening completed"
\ No newline at end of file
diff --git a/test/modules/wazuh_agent.sh b/test/modules/wazuh_agent.sh
new file mode 100644
index 0000000..ad61882
--- /dev/null
+++ b/test/modules/wazuh_agent.sh
@@ -0,0 +1,108 @@
+#!/bin/bash
+# =============================================================================
+# Wazuh agent installation module
+# =============================================================================
+
+# Set script directory
+SCRIPT_DIR="$(cd "$(dirname "${BASH_SOURCE[0]}")" && pwd)"
+
+# Source common functions and variables
+source "./common.sh"
+
+# Function to install Wazuh agent
+install_wazuh_agent() {
+  log_message "INFO" "Installing Wazuh agent"
+  
+  # Install dependencies
+  log_message "INFO" "Installing dependencies for Wazuh agent"
+  apt-get install -y curl apt-transport-https lsb-release gnupg2
+  
+  if [ $? -ne 0 ]; then
+    log_message "ERROR" "Failed to install dependencies for Wazuh agent"
+    return 1
+  fi
+  
+  # Import GPG key
+  log_message "INFO" "Importing Wazuh GPG key"
+  curl -s https://packages.wazuh.com/key/GPG-KEY-WAZUH | gpg --no-default-keyring --keyring gnupg-ring:/usr/share/keyrings/wazuh.gpg --import
+  chmod 644 /usr/share/keyrings/wazuh.gpg
+  
+  # Add Wazuh repository
+  log_message "INFO" "Adding Wazuh repository"
+  echo "deb [signed-by=/usr/share/keyrings/wazuh.gpg] https://packages.wazuh.com/4.x/apt/ stable main" | tee -a /etc/apt/sources.list.d/wazuh.list
+  
+  # Update package lists
+  apt-get update
+  
+  # Install Wazuh agent
+  log_message "INFO" "Installing Wazuh agent package"
+  apt-get install -y wazuh-agent
+  
+  if [ $? -ne 0 ]; then
+    log_message "ERROR" "Failed to install Wazuh agent"
+    return 1
+  fi
+  
+  # Configure Wazuh agent
+  log_message "INFO" "Configuring Wazuh agent"
+  
+  local wazuh_conf="/var/ossec/etc/ossec.conf"
+  
+  # Backup existing configuration
+  if [ -f "$wazuh_conf" ]; then
+    backup_file "$wazuh_conf"
+  fi
+  
+  # Modify the configuration to point to your Wazuh server
+  # Replace with your actual Wazuh server IP address
+  local WAZUH_MANAGER="YOUR_WAZUH_MANAGER_IP"
+  
+  # Configure Wazuh agent to connect to the manager
+  /var/ossec/bin/agent-auth -m "$WAZUH_MANAGER"
+  
+  # Update the ossec.conf file with the manager IP
+  sed -i "s/<address>.*<\/address>/<address>$WAZUH_MANAGER<\/address>/" "$wazuh_conf"
+  
+  log_message "INFO" "Wazuh agent configured to connect to manager: $WAZUH_MANAGER"
+  
+  # Create a README file to explain how to update the manager IP
+  cat > "/root/wazuh-agent-setup.txt" << EOF
+# Wazuh Agent Configuration
+# Generated by security hardening script
+
+To update the Wazuh manager IP address, edit the following file:
+$wazuh_conf
+
+And change the <address> tag to point to your Wazuh manager:
+<address>YOUR_WAZUH_MANAGER_IP</address>
+
+Then, register the agent with your Wazuh manager:
+/var/ossec/bin/agent-auth -m YOUR_WAZUH_MANAGER_IP
+
+Finally, restart the Wazuh agent:
+systemctl restart wazuh-agent
+
+For more information, see the Wazuh documentation:
+https://documentation.wazuh.com/current/installation-guide/installing-wazuh-agent/index.html
+EOF
+
+  log_message "SUCCESS" "Wazuh agent setup documentation created at /root/wazuh-agent-setup.txt"
+  
+  # Enable and start Wazuh agent
+  log_message "INFO" "Enabling and starting Wazuh agent"
+  systemctl daemon-reload
+  systemctl enable wazuh-agent
+  systemctl restart wazuh-agent
+  
+  if [ $? -eq 0 ]; then
+    log_message "SUCCESS" "Wazuh agent service enabled and started"
+  else
+    log_message "ERROR" "Failed to enable or start Wazuh agent service"
+    return 1
+  fi
+}
+
+# Main execution for Wazuh agent
+install_wazuh_agent
+
+log_message "SUCCESS" "Wazuh agent installation completed"
\ No newline at end of file